Home > Parts & Accessories > Engine > Ford
Sort By:
Page of 1
Stromberg Premium Service Kit 97 Carbs 1932-34 FORD ZENITH CARBURETOR GASKET KIT Genuine Stromberg 97 Carburetor

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

Looking for a Stromberg 97 carburetor for your early Ford?
Some traditional hot rod carburetion, or maybe a replacement for your tired Holley 94s or ochesters? The original and Genuine Stromberg 97 carburetor is available only from Stromberg Carburetor. Built accurately to original Stromberg blueprint specification, but with a number of key improvements.
They’re just the same, but better than ever. Extensive dyno and road tests have proved that it matches or exceeds original spec. And all Stromberg service parts are interchangeable with the originals.


Stromberg Premium Jet Wrench Stromberg Superseat Hose Fitting Stromberg Hex Head Plug Chrome

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

Stromberg 1/4NPT Hose Fitting Chrome 1929-1953 Double Groove  Flathead Pulley Oil Pump Pickup & Cover Assembly

*Will fit on your new or original stromberg carb*

DIMENSIONS: 6" Overall Diameter, 1-5/8" O.D., 1-3/8" I.D.
Ford Pickup Truck Oil Pump Pickup Tube - 239 Flathead V8
1932-1948 Fuel Pump Push Rod 8.87" Downdraft Intake Double Carb 1928-1934 Downdraft Intake Triple Carb 1928-1934
This length pushrod may also be required when using an aftermarket aluminum intake manifold.
Available in dual or triple versions. These are machined to accept the early V8 carbs. While they do look impressive they do deliver a good bit of fuel. For stock engine applications you are better off sticking with a single downdraft style of intake. Aluminum. U.S.A.
These are machined to accept the early V8 carbs. While they do look impressive they can also deliver a good bit of fuel. For stock engine applications you are better off sticking with a single downdraft style of intake. Aluminum. U.S.A.
Alternator Pulley 9/16" 1932-1939 Ford & Mercury 1942-1948 Double Groove Flathead Pulley Single Groove Flathead Pulley
Specifically designed to be used with the factory radiator fan. Allows the use of a modern alternator while retaining your cooling fan in stock position.
DIMENSIONS: 5-1/2" Overall Diameter, 1-5/8" O.D, 1-3/8" I.D., 5" Tall

DIMENSIONS: 5" Diameter, 1-1/4" I.D., 1-5/8" O.D.
Flathead Motor Mounts - Weld In Flathead Generator Fan Mount Kit Fuel Pump
Fuel Pump
Our Price: $45.00

Produced by Pete & Jakes. One of the easiest ways to mount a flathead motor in virtually any application.

This is a part the every flathead builder or flathead intake manifold purchaser needs. Newly made stud, square washer, and nut to mount the generator and fan pulley assembly on to any Ford or Mercury V-8 flathead intake manifold. These brand new aluminum fuel pumps were originally made by the French military to be put on service vehicles.
Champion Spark Plug 1938-1953 Ford Champion Spark Plug 1932-1937 Ford Stock Rod 7" Set of 8
Stock Rod 7" Set of 8
Our Price: $279.00
These Champion Copper Plus spark plugs are a direct replacement for your 1938-1953 Ford flathead V8. These Champion Copper Plus spark plugs are a direct replacement for your 1938-1953 Ford flathead V8.
These new 8BA-style connecting rods are:
Manufactured to strict Mil-Spec standards.
Bushed, sized, straight, and true – ready to run.
Weight-difference range of about 3 grams throughout the set.
Save time and money for rebuilds as well as hop-ups.
At our price, they are cheaper than the cost of having an old set of rods mag’d, straightened, resized, and rebushed.

Applications
1949-1953 Ford car
1948-1953 Ford truck
1949-1954 Canadian truck
1949-1953 Mercury car

3-3/4" Crankshaft Ford Aluminum Motor Mounts Stromberg Premium Service Kit 81 Carbs
3-3/4" Crankshaft
Our Price: $399.00
Ford Aluminum Motor Mounts
Our Price: $194.95
New 3-3/4-inch-stroke cast crankshaft. Quality Mil-Spec casting. Uses 8BA-type locked-insert bearings and rods.
Applications:
1939-1953 Ford car and truck
1939-1948 Mercury
All French
In stock and ready to ship. Truck shipping required. Rate quoted upon order.

This pair of mounts accommodates both Windsor and Cleveland engines for '32 and '33/'34 Ford chassis. They are CNC machined from 6061 Aluminum alloy and come with trim-to-fit weld on frame mounting tabs.

*Will fit on your new or original stromberg carb*

Stromberg Fuel Accelerator Pump Rod 97 & 81 Stromberg Fuel Accelerator Pump Rod 40 & 48 Stromberg Emulsion Tubes - Pair

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

Stromberg Idle Adjust Kit - Pair Stromberg Idle Jets - Pair Stromberg Float Pin
Stromberg Float Pin
Our Price: $6.95

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

Stromberg Fuel Inlet S-Jet Stromberg Fuel Accelerator Pump Kit 48 & 97 Stromberg Fuel Accelerator Pump Kit 81

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

Stromberg Bowl Plug Kit Stromberg Accelerator Pump Lever Stromberg Brass Float With Pin
Stromberg Bowl Plug Kit
Our Price: $21.95

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

Stromberg Choke Kicker Assembly Stromberg Exterior Spring Kit Stromberg Accelerator Pump Discharge Jets

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

Stromberg Throttle Shaft & Lever Kit Stromberg Throttle Plate - Pair Stromberg Throttle Stop Screw & Spring

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

Stromberg Fulcrum Screw Kit Stromberg Blank Off Plate Stromberg Body Screw Kit
Stromberg Blank Off Plate
Our Price: $13.95
Stromberg Body Screw Kit
Our Price: $11.95

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

Stromberg Manifold Stud Kit - 3 Stromberg Superseat Hose Fitting Stromberg Banjo Fitting Single

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

Stromberg Banjo Fitting Double Stromberg Superlink Throttle Arm Stromberg Superlink Arm & Swivel

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

*Will fit on your new or original stromberg carb*

Stromberg Main Jets - Pair Stromberg Power Valve Limited Edition Black Stromberg 97 Carburetor
Stromberg Power Valve
Our Price: $13.95

*Will fit on your new or original stromberg carb*

Power Valve, Standard Flow, Single Stage, Stromberg 97, Drill Number 60, Hole Size .040 in.
*Looking for a Stromberg 97 carburetor for your early Ford?*
Yes, they're back, even though they never really went away. And they're just the same, But better than ever. The Genuine Stromberg 97. A brand new carburetor with Stromberg on one side. And a big 97 on the other. Available only from Stromberg Carburetor. And now in a new Limited Edition black and chrome finish!
Remember, like any carburetor, the Genuine Stromberg 97 needs proper installation and tuning for optimum performance. Every 97 comes with full installation instructions.




Battery Hold down with "J" Bolts
Battery hold down and "J" bolts replace original vintage OEM parts for
1966-69 Bronco
1967-70 Mustang
1966-69 Comet
1967-69 Cougar
1966-69 Fairlane
1965-69 Truck
1965-69 Ford Full Size
1965-69 Mercury Full Size