Installation Instructions for SO-CAL Speed Shop Swan Neck Outside Mirrors

STEP 1: Begin by establishing the desired location. It's probably a good idea to have somebody hold the mirror in different positions while you sit in the driver's seat and figure which position best suits you. Apply some 2-inch masking tape to the area and mark out the location of the mounting hole.

Sculpted by Jim "Jake" Jacobs to resemble those classic mirrors of early luxury cars, the SO-CAL outside mirror features a beautiful die-cast swan neck design along with a 4-inch diameter stainless steel-backed mirror. It's easy to install if you follow these simple instructions. 

NOTE: The mirror's Tear drop base has been given a slight concave shape for precise location and "grip" so that you don't have to drill a second locating hole.

(Click any image to see step by step process)

STEP 2: Once you have marked out the position of the mirror and marked its location, center punch the position of the hole.STEP 3: Drill a 1/8-inch pilot hole.STEP 4: Drill out the mounting hole to 5/16.STEP 5: Here's the mounting hole drilled and the masking tape removed.STEP 6: After removing the interior trim, you can bolt on the mirror using the rubber gasket supplied to protect the paint.STEP 6: After removing the interior trim, you can bolt on the mirror using the rubber gasket supplied to protect the paint.
STEP 1: Begin by establishing the desired location. It's probably a good idea to have somebody hold the mirror in different positions while you sit in the driver's seat and figure which position best suits you. Apply some 2-inch masking tape to the area and mark out the location of the mounting hole. STEP 1: Begin by establishing the desired location. It's probably a good idea to have somebody hold the mirror in different positions while you sit in the driver's seat and figure which position best suits you. Apply some 2-inch masking tape to the area and mark out the location of the mounting hole.
STEP 2: Once you have marked out the position of the mirror and marked its location, center punch the position of the hole. STEP 2: Once you have marked out the position of the mirror and marked its location, center punch the position of the hole.
STEP 3: Drill a 1/8-inch pilot hole. STEP 3: Drill a 1/8-inch pilot hole.
STEP 4: Drill out the mounting hole to 5/16. STEP 4: Drill out the mounting hole to 5/16.
STEP 5: Here's the mounting hole drilled and the masking tape removed. STEP 5: Here's the mounting hole drilled and the masking tape removed.
STEP 6: After removing the interior trim, you can bolt on the mirror using the rubber gasket supplied to protect the paint. STEP 6: After removing the interior trim, you can bolt on the mirror using the rubber gasket supplied to protect the paint.
STEP 6: After removing the interior trim, you can bolt on the mirror using the rubber gasket supplied to protect the paint. STEP 6: After removing the interior trim, you can bolt on the mirror using the rubber gasket supplied to protect the paint.