Installation Instructions for SO-CAL Speed Shop Headlight Stands

STEP 1: Identify the driver (D) and passenger (P) side stands. STEP 2: Front shock mounts must be installed or mocked up before the headlight stand can be mounted.

Headlight mounting is generally a matter of personal preference, but here are a few guidlines to help.

(Click any image to see step by step process)

STEP 3: Assemble a headlight on a stand and move fore and aft on frame until a suitable location is found.STEP 4: Once a suitable location has been determined, mark the position of the bolt holes with a scribe or pencil.STEP 5: Install headlight using the provided 5/16-inch carriage bolts, washer and nylock nuts.STEP 6: Install headlights and adjust. Note: some headlights may require modification to get full adjustment when mounted on stand. If this is necessary, disassemble headlight and file slot with a square file to give the needed adjustment.
STEP 1: Identify the driver (D) and passenger (P) side stands. STEP 2: Front shock mounts must be installed or mocked up before the headlight stand can be mounted. STEP 1: Identify the driver (D) and passenger (P) side stands. STEP 2: Front shock mounts must be installed or mocked up before the headlight stand can be mounted.
STEP 3: Assemble a headlight on a stand and move fore and aft on frame until a suitable location is found. STEP 3: Assemble a headlight on a stand and move fore and aft on frame until a suitable location is found.
STEP 4: Once a suitable location has been determined, mark the position of the bolt holes with a scribe or pencil. STEP 4: Once a suitable location has been determined, mark the position of the bolt holes with a scribe or pencil.
STEP 5: Install headlight using the provided 5/16-inch carriage bolts, washer and nylock nuts. STEP 5: Install headlight using the provided 5/16-inch carriage bolts, washer and nylock nuts.
STEP 6: Install headlights and adjust. Note: some headlights may require modification to get full adjustment when mounted on stand. If this is necessary, disassemble headlight and file slot with a square file to give the needed adjustment. STEP 6: Install headlights and adjust. Note: some headlights may require modification to get full adjustment when mounted on stand. If this is necessary, disassemble headlight and file slot with a square file to give the needed adjustment.